E-mail  
Home  |  Coming into Institute  |  About Director  |  Product  |  Application  |  Technical Cooperation  |  Contact us
>> Product
>> Contact
  • Add:Anqiu,Shandong,China
  • Tel:+86-536-4390798
  • Fax:+86-536-4936598
  • Mobile:+86-13963693282
  • ZipCode:262100
  • E-mail:zf@zffrp.cn
  • http:www.zffrp.cn
  >> Product -- BMG3 cable bracket

    Product Features
    ◆ BMG3 cable bracket:
    FRP cable bracket is a new product based on the national power company into the ground and the communications network cables underground engineering design and development. The products use SMC as raw material, and are processed through the molding. Having anti-corrosion, non-conductive, high strength, light weight, high temperature, long life and so on. For wet and harsh environment of the cable trench of cable support purposes.
BMG3电缆支架 BMG3电缆支架
BMG3 cable bracket BMG3 cable bracket
BMG3电缆支架 BMG3电缆支架
BMG3 cable bracket BMG3 cable bracket

    Performance
    1、high strength:The maximum load carrying capacities up to 600 kg;
    2、long service life:50 years backlight, 20 years under light;
    3、anti-corrosion:especially suitable for dark and damp, salt spray, acid and alkali environments.
    4、good electrical insulation:insulation resistance is greater than 1000GΩ; surface resistance is not less than 10GΩ.
    5、easy to use:You can install embedded or use expansion screws to install.
    6、fire:oxidation number up to 60.

    Model specifications and installation methods

    BMG3 cable bracket: easy installation, but require special flat for cable trench wall. Unable to cope with changes of the cable layers. Buried cable bracket: easy installation, but cable trench wall for special formation, the design of different layers can be the construction of the cable trench. Plug-in cable bracket: Install the inconvenient requirement for cable trench wall formation, the design of different layers can be the construction of the cable trench. Bolt-type cable bracket: easy installation, demand for cable trench wall formation, the design of different layers can be the construction of the cable trench.
    1. Cable trenches, cable channels and cable models Jingkuan size of stent size selection. TDL -3/300/540 stent placement for three cables, TDL-2/200/320 stent placement for two cables. If special requirements can be customized according to the actual situation.
    2. Environmentally appropriate temperature range: -20 ℃ - +70 ℃.
    3. Install appropriate level of direction, such as the use of other measures to tilt Zexu fixed cables.
    4. Calling for a balanced, vertical, ipsilateral stent level spacing 80 cm, bilateral stent staggered installed to ensure a balanced bearing bracket.
    5. Stent to be embedded base and walls of concrete to ensure adequate stent occlusion, dense, and a fixed wall at right angles to keep state to ensure that the base force area to avoid distortion. The laying of cables, it is desirable to lay a top-down, drag the appropriate level of cable drag.

Embedded-type cable bracket screw-type cable bracket
Embedded-type cable bracket screw-type cable bracket
Type

pecification

Size L1 of fixed-side

Bearing side length of the L2

Embedded-type

FRP-L570/380

190

380

Embedded-type

FRP-L450/300

150

300

screw-type

FRP-T260

25

235

screw-type

FRP-T310

25

285

screw-type

FRP-T380

25

355

screw-type

FRP-T500

25

475

screw-type

FRP-T600

25

575




| English | © 2009 Weifang Zhongfu Frp Institute All rights reserved. Technical Support:Zailine Network